个人简介
葛畅，北京航空航天大学机械工程及自动化学院副教授。2021年毕业于加拿大英属哥伦比亚大学，获电子与计算机工程博士学位并在该校从事博士后研究，2025年6月加入北京航空航天大学。主要从事聚合物微机电系统（MEMS）制造、仿生传感器设计与具身感知系统研究。主持国家自然科学基金面上项目、江西省实验室科研项目等3项科研项目。发表SCI论文17篇，获美国发明专利授权2项，代表性成果以第一作者及通讯作者发表于Microsystems & Nanoengineering、Sensors and Actuators A: Physical、IEEE Transactions on Instrumentation and Measurement等期刊。
基本信息
办公地点：北京航空航天大学沙河校区科研三号楼420
电子邮件：cge12@buaa.edu.cn
教育背景
英属哥伦比亚大学 电子与计算机工程 博士 2015.09—2021.11
阿尔伯塔大学 电子与计算机工程 硕士 2013.09—2015.06
东南大学 电子科学与技术 学士 2009.09—2013.06
工作经历
北京航空航天大学 机械工程及自动化学院 副教授 2025至今
英属哥伦比亚大学 电气与计算机工程系 博士后 2021-2025
研究方向
1、聚合物MEMS传感器设计及制造
2、仿生传感器结构设计
3、多模态触觉感知系统
4、智能装备的具身感知技术
代表性科研项目
1、国家自然科学基金委，面上项目，2027-2030，主持
代表性学术论文（*为通讯作者）
1. Chang Ge*, Edmond Cretu. Polymeric piezoelectric accelerometers with high sensitivity, broad bandwidth, and low noise density for organic electronics and wearable microsystems. Microsystems & Nanoengineering, 2024, 10: 61. DOI: 10.1038/s41378-024-00704-6.
2. Chang Ge*, Edmond Cretu. A polymeric piezoelectric MEMS accelerometer with high sensitivity, low noise density, and an innovative manufacturing approach. Microsystems & Nanoengineering, 2023, 9: 151. DOI: 10.1038/s41378-023-00628-7.
3. Chang Ge*, Edmond Cretu. Using Polymeric Piezoelectric Accelerometers to Measure Vocal Pitches and Tones. IEEE Transactions on Instrumentation and Measurement, 2025, 74: 9510011. DOI: 10.1109/TIM.2025.3550604.
4. Chang Ge*, Edmond Cretu. A sacrificial-layer-free fabrication technology for MEMS transducer on flexible substrate. Sensors and Actuators A: Physical, 2019, 286: 202-210. DOI: 10.1016/j.sna.2018.12.049.
5. Chang Ge*, Edmond Cretu. Design and fabrication of SU-8 CMUT arrays through grayscale lithography. Sensors and Actuators A: Physical, 2018, 280: 368-375. DOI: 10.1016/j.sna.2018.08.006.
6. Chang Ge*. Tactile Sensor for Subcutaneous Vocal Organ Vibrations Inspired by Otolith Cilia. Journal of Bionic Engineering, 2026, 23: 302-310. DOI: 10.1007/s42235-025-00811-8.
......
学术与社会服务
1、 Microsystems & Nanoengineering 青年编委（2024.10—至今）
2、 A Advances in Manufacturing 青年编委（2025.10—2027.10）；
3、 Advances in Manufacturing 青年编委（2025.10—2027.10）；
Profile
Chang Ge, Ph.D.
Beihang University
School of Mechanical Engineering and Automation
cge12@buaa.edu.cn
Research Interests
Polymeric MEMS sensors design and fabrication
Bio-inspired sensor design
Multimodal tactile sensing system
Embodied sensing system for intelligent equipment
Education
The University of British Columbia, Vancouver, Canada
Ph.D., Electrical and Computer Engineering, September 2015 - November 2021
University of Alberta, Edmonton, Canada
M.Sc., Electrical and Computer Engineering, September 2013 - June 2015
Southeast University, Nanjing, China
B.Eng., Electronic Science and Technology, September 2009 - June 2013
Research and Professional Experience
Associate Professor in the School of Mechanical Engineering and Automation
Beihang University, Beijing, China 2025- present
Post-doctoral research fellow in Adaptive Microsystem Lab, Dept. of Electrical and Computer Engineering
University of British Columbia, Vancouver, BC, Canada 2021 – 2025
