个人简介
马俊功，讲师，硕士生导师。2003年毕业于北京航空航天大学自动化科学与电气工程学院，获机械电子工程博士学位。2003年10月-2004年10月在日本SMC株式会社筑波技术中心从事气动技术研究工作。目前主要研究方向包括电液伺服系统及控制、现代气动技术、机电控制及自动化等。主持和参与纵向和横向课题30余项。发表论文40多篇。
基本信息
办公地点：北京市航空航天大学沙河校区科研三号楼801
电子邮件：jgma@buaa.edu.cn
教育背景
北京航空航天大学 机械电子工程 博士 1999-2003
内蒙古工业大学 机械设计及理论 硕士 1996-1999
南京理工大学 机械设计及制造 学士 1987-1991
工作经历
北京航空航天大学 机械工程及自动化学院 讲师 2009-至今
北京航空航天大学 自动化科学与电气工程学院 讲师 2006-2009
北京航空航天大学 自动化科学与电气工程学院 博士后 2003-2006
日本SMC株式会社 筑波技术中心 访问学者 2004-2005
内蒙古第二机械制造总厂 深孔制件厂 工程师 1991-1996
研究方向
1、电液伺服系统及控制
2、现代气动技术
3、机电控制及自动化
4、电液伺服系统建模及仿真
讲授课程
1、流体传动与控制 （本科生课程）
2、软件与编程 （本科生课程）
3、Fluid Power Transmission and Control （研究生课程，英文）
4、机电一体化技术及应用 （研究生课程）
5、传动与测控综合实验 （本科生课程）
代表性科研项目
1、舱门收放功率驱动系统方案设计及验证，横向，2019-2020，主持
2、重型液压马达设计优化及测试设备研制，横向，2019-2021，主持
3、电子束成像系统振动特性研究，科技部重大专项，2018-2021，子课题负责人
4、"起落架收放可靠性试 验"系统的设计，横向，2011-2013，主持
5、综合试验系统研制，省、市、自治区科技项目，2009-2013，主持
代表性学术论文（*为通讯作者）
1.Wang, Hui ; Ma, Jungong*; Ren, Ziyu; Gong, Zheyuan; Hao, Yufei; Wang, Tianmiao; Wen, Li *. Fiber-reinforced soft robotic anthropomorphic finger. 2016 International Conference on Robotics and Automation Engineering, ICRAE 2016, p 1-5, November 8, 2016, Accession number: 20165203180937
2.Tadesse, Amanuel; Jungong, Ma*. Modeling and simulations on a fuzzy- PID position controller of electro hydraulic servo system. 2015 12th International Conference on Fuzzy Systems and Knowledge Discovery, FSKD 2015, p 96-103, January 13, 2016. Accession number: 20162002385496
3.Ma, Jungong; Shang, Xianyang. Constant acceleration control of valve-control-cylinder system based on neural network. 2012, Frontiers of Advanced Materials and Engineering Technology, FAMET 2012. Advanced Materials Research, v 430-432, p 2041-2045, Accession number: 20120414713942
4.Ma, Jungong ; Jiang, Hongwei; Chen, Juan. Study of PLC communication technology based on Profibus-DP. 2012, Materials Science and Information Technology, MSIT 2011. Advanced Materials Research, v 433-440, p 4903-4907, Accession number: 20120414712943
5.Ma, Jun'gong ; Gao, Xiao'hua; Liu, Yue'xue. Design and implementation of information management system for gas valve remote monitoring and control. Materials Science and Information Technology, MSIT 2011. Advanced Materials Research, v 433-440, p 6838-6842, 2011, Accession number: 20120414713275
6.Ma, Jungong; Qi, Xiaoye; Chen, Juan. Research on airborne intelligent hydraulic pump system. 28th Congress of the International Council of the Aeronautical Sciences 2012, ICAS 2012, v 5, p 3622-3628, 2012, Accession number: 20132516434088
7.Ma, Jungong; Liu, Yuexue;Bai, Guochang. Study on a new type gas regulator based on dual-mode self-tuning PID control. Applied Mechanics and Materials, v 40-41, p 40-45, 2011, Advances in Science and Engineering Frontier Topics in Theoretical and Applied Science and Engineering. Accession number: 20110213569401
8.Ma, Jungong; Chen, Juan; Qi, Xiaoye; Wang, Zhanlin; Oneyama, Naotake. Life test method and fault mechanism analysis of pneumatic pressure regulator. Proceedings of 2009 8th International Conference on Reliability, Maintainability and Safety, ICRMS 2009, p 1258-1262, 2009, Accession number: 20103513188798
9.Ma, Jungong; Chen, Juan; Zhao, Ke; Senoo, Mitsuru. Flow-rate characteristics parameters of pneumatic component. Proceedings of the IEEE International Conference on Automation and Logistics, ICAL 2008, p 2946-2949, 2008, Accession number: 20084811743632
10.Ma, Jungong; Wu, Baolin; Chen, Juan; Tang, Zhiyong; Oneyama, Naotake. Error comparison between ISO/WD 6358-2 and ISO 6358:1989. Proceedings of SPIE - The International Society for Optical Engineering, v 7128, 2008, Seventh International Symposium on Instrumentation and Control Technology: Measurement Theory and Systems and Aeronautical Equipment. Accession number: 20084711730672
学术与社会服务
1、中国人工智能学会智能空天系统专业委员会委员；
Jungong Ma, Ph.D.
Beihang University
School of Mechanical Engineering and Automation
jgma@buaa.edu.cn
Electro-hydraulic Servo System and Control
Modern Pneumatic Technology
Electromechanical Control and Automation
Modeling and Simulation of Electro-hydraulic Servo System
Beihang University, Beijing, China
Ph.D. Mechanical and Electronic Engineering, 11/2003
Inner Mongolia University of Technology, Hohhot, China
M.S., Mechanical Design and Theory, 07/1999
Nanjing University of Science and Technology, Nanjing, China
B.S., Mechanical Design and Manufacturing, 07/1991
Research and Professional Experience |
Lecturer in School of Mechanical Engineering and Automation,
Beihang University, Beijing, China 2009 - present
Lecturer in School of Automation Science and Electrical Engineering
Beihang University, Beijing, China 2006 - 2009
Postdoctoral Researcher in School of Automation Science and Electrical Engineering
Beihang University, Beijing, China 2003 - 2006
Visiting Scholar in Tsukuba Technology Center
SMC Corporation, Japan 2004 - 2005
Engineer in Deep Hole Parts Factory
Inner Mongolia Second Machinery Manufacturing General Factory 1991 - 1996
