|
论文列表：
2018
1. Rujian Sun, Ying Zhu, Wei Guo*, Peng Peng, Liuhe Li, Yu Zhang, Jian Fu, Fei Li, Lixin Zhang, Microstructural evolution and thermal stress relaxation of Al2O3/1Cr18Ni9Ti brazed joints with nickel foam, Vacuum, 2018,148:18-26
2. Peng Peng, Li Lihang, Guo Wei*, Hui Zhuang, Fu Jian, Jin Chao, Liu Yangai, Zhu Ying，Room Temperature Joining of Silver Nanoparticles Using Potassium Chloride Solution for Flexible Electrode Application, The Journal of Physical Chemistry, 2018, 122 (5): 2704–2711
3. Weidong Li , Lixia Ma , Peng Peng , Qiang Jia , Zhandong Wan, Ying Zhu, Wei Guo*, Microstructural evolution and deformation behavior of fiber laser welded QP980 steel joint, Materials Science & Engineering A, 2018, 717: 124–133
4. Wei Guo , Zhandong Wan , Peng Peng*, Qiang Jia , Guisheng Zou , Yun Peng, Microstructure and mechanical properties of fiber laser welded QP980 steel, Journal of Materials Processing Technology, 2018, 256：229-238.
5. Qiang Jia, Lei Liu, Wei Guo, Yun Peng, Guisheng Zou *, Zhiling Tian, Y. Norman Zhou, Microstructure and Tensile-Shear Properties of Resistance Spot-Welded Medium Mn Steel, Metals, 2018, 8, 48-61.
6. Rujian Sun, Liuhe Li, Ying Zhu, Wei Guo*, Peng Peng, Baoqiang Cong, Jianfei Sun，Microstructure, residual stress and tensile properties control of wire-arc additive manufactured 2319 aluminum alloy with laser shock peening, Accept.
7. 孙汝剑，李刘合，朱颖，彭鹏，张利新，于文花，郭伟*，激光冲击强化对TC17钛合金微观组织及拉伸性能的影响，稀有金属材料与工程，Accept.
2017
1. Shuai Huang, Ying Zhu, Wei Guo*, Peng Peng, Xungang Diao, Impact toughness and microstructural response of Ti-17 titanium alloy subjected to laser shock peening, Surface and Coatings Technology，2017, 25(327): 32-41
2. 贾 强，郭 伟，彭 鹏，朱 颖，邹贵生，DP980 激光焊接温度场模拟及力学性能，稀有金属材料与工程，2017，7（46）：1905-1910
3. Rujian Sun, Liuhe Li, Ying Zhu, Lixin Zhang, Wei Guo, Peng Peng*, Bo Li, Chao Guo, Lei Liu, Zhigang Che, Weidong Li, Jianfei Sun and Hongchao Qiao, Dynamic response and residual stress fields of Ti6Al4V alloy under shock wave induced by laser shock peening. Modelling and Simulation in Materials Science and Engineering, 25 (2017) 065016.
4. Wei Guo, Hongqiang Zhang, Xiaoying Zhang, Lei Liu*, Peng Peng, Guisheng Zou, Y.Norman Zhou, Preparation of nanoparticle and nanowire mixed pastes and their low temperature sintering, Journal of Alloys and Compounds 690 (2017) 86-94.
5. Qiang Jia, Wei Guo, Weidong Li*, Peng Peng, Ying Zhu, Guisheng Zou, Yun Peng, Zhiling Tian, Experimental and numerical study on local mechanical properties and failure analysis of laser welded DP980 steels, Materials Science & Engineering A 680 (2017) 378–387
6. Peng Peng, Wei Guo*, Ying Zhu, Lei Liu, Guisheng Zou, Y. Norman Zhou, Nanoscale Wire Bonding of Individual Ag Nanowires on Au Substrate at Room Temperature, Nano-Micro Letters , (2017) 9: 26. DOI 10.1007/s40820-017-0126-8
7. Chong Peng, Yuzhe Xiao, Yanzhong Wang, Wei Guo*, Effect of laser shock peening on bending fatigue performance of AISI 9310 steel spur gear, Optics and laser technology, 10.1016/j.optlastec.2017.03.017 (Q2)
8. Zhuang Hui, Yangai Liu*, Wei Guo, Lihang Li, Nan Mu, Chao Jin, Ying Zhu, Peng Peng, Chemical sintering of direct-written silver nanowire flexible electrodes under room temperature, Nanotechnology 28 (2017) 285703 (Q1)
9. Fei Li , Wei Guo*, Bo Lin, BoJin Qia, Lincong Chen, Wenjung Yu, Ying Zhu, Interfacial microstructure and mechanical properties of Fe-36Ni invar alloy GTAW joint, Indian Journal of Engineering & Materials Sciences,2017,24:290-294
10. Guo W, Wang H, Jia Q, Zhu Y, Peng P. Transient liquid phase bonding of nickel-base single crystal alloy with a novel Ni-Cr-Co-Mo-W-Ta-Re-B amorphous interlayer. High Temperature Materials and Processes. 2017 , 36
11. Zhandong Wan, Wei Guo,Qiang Jia,Lang Xu,Peng Peng ,Hardness Evolution and High Temperature Mechanical Properties of Laser Welded DP980 Steel Joints, High Temperature Materials and Processes. 2017 , 36
2016
1. Jia Q, Guo W, Li W, Zhu Y, Peng P, Zou G. Microstructure and tensile behavior of fiber laser-welded blanks of DP600 and DP980 steels. Journal of Materials Processing Technology 2016; 236: 73-83.
2. Jia Q, Guo W, Peng P, Li M, Zhu Y, Zou G. Microstructure-and Strain Rate-Dependent Tensile Behavior of Fiber Laser-Welded DP980 Steel Joint. Journal of Materials Engineering and Performance 2016; 25(2): 668-676.
3. Guo W, Jia Q, Li R, Li W. The superplastic deformation behavior and phase evolution of Ti-6Al-4V alloy at constant tensile velocity. High Temperature Materials and Processes 2016. DOI 10.1515/htmp-2015-0205.
4. Shuai Huang, Ying Zhu, Wei Guo*, Hongchao Qiao and Xungang Diao，Effects of Laser Shock Processing on Fatigue Performance of Ti-17 Titanium Alloy, High Temperature Materials and Processes 2016.
5. Guo W, Wang H, Jia Q, Zhu Y, Peng P. Transient liquid phase bonding of nickel-base single crystal alloy with a novel Ni-Cr-Co-Mo-W-Ta-Re-B amorphous interlayer. High Temperature Materials and Processes. Accepted.
6. Chong Peng, Yujie Meng, Wei Guo, Influence of Laser Shock Processing on WC-Co Hardmetal, Materials and Manufacturing Processes, 2016 0: 1-8.
2015
1. Wei Guo, Tengfei Gao, Xuefei Cui, Ying Zhu, Paul K. Chu, Interfacial reactions and zigzag groove strengthening of C/C composite and Rene N5 single crystal brazed joint, Ceramics International 41 (2015) 11605–11610.
2. Wei Guo, Lin Wang, Ying Zhu, Paul K Chu,Microstructure and mechanical properties of C/C composite/TC4 joint with inactive AgCu filler metal, Ceramics International 41 (2015) 7021–7027.
3. Wei Guo, Zhi Zeng, Xiaoying Zhang, Peng Peng, Shanping Tang , Low-Temperature Sintering Bonding Using Silver Nanoparticle Paste for Electronics Packaging, Journal of Nanomaterials, 2015, Article ID 897142.
4. Ying Zhu, Dan Qi,Wei Guo, Hui Kang, Ping Qu, The braze joint between Al2O3 to 1Cr18Ni9Ti using a nickel foam, Weld World DOI 10.1007/s40194-015-0224-5
5. 郭伟，齐丹，杨建军，李飞，华永平，虞文军, Zr含量对Ti-Zr-Cu-Ni钎料及钎焊接头性能的影响, 北京航空航天大学学报, 2015,41(11): 2029-2034
6. 程战,郭伟,刘磊, 邹贵生, 周运鸿,石英玻璃与硅的飞秒激光微连接及其接头性能研究,中国激光,2015, 42(9): 0906004-1~ 0906004-6
7. Qi Dan，Zhu Ying, Guo Wei, Li fei, Yu Wenjun, Zhang Wei, New Ti-Zr-Cu-Ni-La system brazing filler metals for the joining of titanium alloy, China Welding, 2015 24(2): 6-11(EI, 通讯作者)
8. JIN YANG, YULONG LI, HUA ZHANG, WEI GUO, DAVID WECKMAN, NORMAN ZHOU, Dissimilar Laser Welding/Brazing of 5754 Aluminum Alloy to DP 980 Steel: Mechanical Properties and Interfacial Microstructure，METALLURGICAL AND MATERIALS TRANSACTIONS A, 2015, 46A, 5149-5157
2013
1. Wei Guo, Ying Zhu, Lin Wang,Ping Qu,Hui Kang,Paul K. Chu, Microstructure evolution and mechanical properties of vacuum-brazed C/C composite with AgCuTi foil, Materials Science and Engineering: A, 2013（564）:192-198. (Q1)
2. Guo Wei，Li Ruiting，Zhu Ying，Liu Qin，Qu Ping，Kanghui，Tensile Behavior and Microstructure Evolution of Laser Welded Ti-6Al-4V Alloy，Rare Metal Materials and Engineering，2013，42（S2）：74-78.
3. Guo Wei，Song Peng，Zhu Ying，Qu Ping，Kang Hui，Wang Haiyan，Effect of Laser Welding on Microstructure andMechanical Behavior of Ni-49at%Ti，Rare Metal Materials and Engineering，2013，42（S2）：78-82.
4. Song Peng, Zhu Ying, Guo Wei, Qu Ping, Kang Hui, Wen Kai, Mechanism of Crack Formation in the Laser Welded Joint between NiTi Shape Memory Alloy andTC4, Rare Metal Materials and Engineering,2013, 42:6-9.
2012
1. Guo Wei，Zou Guisheng，Chai Xiao，Wu Aiping，Zheng Minghui，Jiao Yulei，Ren Jialie，The study of multiple thermal cycle of HTS YBCO bulk，Physica C-Superconductivity and Its Applications，2012，474：25-28.
2011
1. Xiao Chai, Guisheng Zou, Wei Guo, Hailin Bai, Aiping, Wu, Jialie Ren, Fast Joining YBCO bulks with melt Ag doped Y-Ba-Cu-O solder, China Welding, 2011, 20(1):12-16.
2010
1. Guo Wei, Zou Guisheng, Wu Aiping, Bai Hailin, Ren Jialie,Soldering of Bi-2223/Ag high temperature superconducting tapes with Sn-Pb-Bi-Ag alloy past, Physica C, 2010, 470(2): 115-119.
2. Wei Guo, Guisheng Zou, Aiping Wu, Fangbing Zhou, Jialie Ren, Fabrication of joint Bi-2223/Ag superconducting tapes with BSCCO superconducting powders by diffusion, Physica C, 2010, 470（9-10）: 440-443.
3. Guo Wei, Zou Guisheng, Chai Xiao, Wu Aiping, He Jiarun, Bai Hailin, Ren Jialie, Jiao Yulei, Joining of textured YBCO with YBCO added Ag2O, Physica C, 2010, 470（11-1）: 482-486 .
4. Xiao Chai, Guisheng Zou, Wei Guo, Aiping Wu, Jiarun He, Hailin Bai, Ling Xiao, Yulei Jiao, Ren Jialie, Fast joining of melt textured Y–Ba–Cu–O bulks with high quality, Physica C, 2010, 470(13-14), 598-601.
5. 郭伟 邹贵生 何佳闰 吴爱萍 肖玲 郑明辉 焦玉磊 白海林 任家烈， YBCO 超导块材超导性能高温失超及恢复， 清华大学学报， 2010, 50(2): 187-190.
2009
1. Guo Wei, Zou Guisheng, Wu Aiping, Wang Yanjun, Bai Hailin, Ren Jialie, Superconducting joint of Bi-2223/Ag superconducting tapes by diffusion bonding, Physica C, 2009, 469: 1898–1901.
2. Guo Wei, Zou Guisheng, Wu Aiping, Wang Yanjun, Bai Hailin,Ren Jialie, Study of air heat treatment on Bi-2223/Ag superconducting tapes, Physica C, 2009, 469: 778–781.
3. 郭伟， 邹贵生， 吴爱萍， 任家烈， 直接扩散连接制备多芯Bi 系超导带材超导接头, 焊接学报，2009,30（2）：125-128
4. 郭伟，赵熹华，冯吉才，Ti-6Al-4V/QAl10-3-1.5扩散连接工艺研究，材料科学与工艺，2009，17（增刊1）：73-77
2008之前
1. Song Minxia，Zhao Xihua, Huang Da, Guo Wei, Feng Jicai, Finite element modeling of residual stresses in the diffusion bonding joints of TC4/QA110-3-1.5，Rare Mental Materials and Engeering,2007，36（11）：1938~1941
2. 郭伟，赵熹华，宋敏霞，冯吉才，杨飚. 装配间隙对膨胀压差法扩散连接压力的影响，吉林大学学报，2007,（1）：22~24
3. Song Minxia, Zhao Xihua, Guo Wei, Feng Jicai, Huang Da，Diffusion bonding of Ti26Al24V to ZQSn10210 in vacuum，China Welding, 2007, (1):1~5
4. 郭伟，邹贵生，王延军，白海林，吴爱萍，任家烈. Bi系多芯超导中间层不加中间层高温加压扩散连接，钢铁研究学报，2007，19（增刊1）:201~204
5. GuoWei, Zhao Xihua，Song Minxia，Feng Jicai, Yang biao, Diffusion bonding of Ti-6Al-4V to QAl 10-3-1.5 with Ni/Cu interlayers，J Mater Sci Technol, 2006, 22 (6): 817~820
6. 郭伟，赵熹华，宋敏霞，冯吉才，杨飚. TC4/QAL10-3-1.5直接扩散连接形貌分析,吉林大学学报,2006, 36 (3):0285~0288
7. 宋敏霞，赵熹华，郭伟，冯吉才.Ti-6Al-4V/Ni/ZQSn10-10的扩散连接，吉林大学学报，2006，36（1）：42~45
8. GuoWei, Zhao Xihua，Song Minxia，Feng Jicai, Yang biao. Diffusion bonded transition of TC4 to QAl10-3-1.5,China Welding, 2005, 14 (2)：109~112
9. 郭伟，赵熹华，宋敏霞，冯吉才，杨飚.TC4/Ni/QAl10-3-1.5扩散连接研究，焊接学报,2005, 26 (7)：63~66
10. 宋敏霞，赵熹华，郭伟，钛合金与非金属材料扩散连接研究现状与发展，焊接，2005（10）：5~7
11. 宋敏霞，赵熹华，郭伟，钛合金与其它金属材料扩散连接研究现状与发展，焊接，2005(1)：6~7
专利列表：
1. 郭伟 邹贵生 吴爱萍 任家烈 肖玲 郑明辉 焦玉磊 何家闰 使用添加Ag2O的YBCO钎料钎焊法制备大尺寸钇系块材的方法, ZL200910077863.8
2. 郭伟 邹贵生 吴爱萍 任家烈 肖玲 郑明辉 焦玉磊 何家闰 以YBCO为钱料钎焊法制备大尺寸钇系块材的方法, ZL 200910077861.9
3. 郭伟 黄帅 朱颖 刁训刚 康慧 曲平 一种车载激光冲击强化设备， ZL 2013 1 0471048.6
4. 朱颖 黄帅 郭伟 刁训刚 康慧 曲平 彭鹏 一种处理吸收保护膜的系统, ZL 201410668919.8
5. 朱颖 黄帅 郭伟 刁训刚 康慧 曲平 彭鹏 一种用于板材对接钎焊的装置ZL, 201410670461.X
|
